Features
Bin picking doesn't end with 3D recognition. One system turns recognition results into paths the robot can actually pick along, and also handles product changeovers and data during operation.
-
01
3D Vision + Deep Learning Recognizes Even Overlapping Parts
A structured-light or stereo 3D sensor captures the whole bin at once to build a point cloud, and deep learning identifies each part and calculates its 6D pose — 3 axes of position and 3 of rotation. Overlapping, flipped and glossy metal parts are recognized reliably, and the easiest picking order is decided as well.
-
02
Gripper Interference Check and Automatic Path Generation
For every recognized pose, the system first checks in virtual space whether the gripper would hit the bin wall or neighboring parts, then automatically generates robot paths only for pickable parts. Register a suction, finger or magnet gripper model and approach angles and grasp points are calculated automatically, so almost no teaching is needed.
-
03
Universal Robot · Equipment Integration
Connects to major industrial robots and cobots — Doosan, Hyundai, FANUC, ABB, KUKA, Yaskawa and more — through standard interfaces. The vision controller sends pick coordinates and poses to the robot controller and exchanges load-complete, bin-change and emergency-stop signals with machine tools, conveyors and PLCs via I/O or fieldbus.
-
04
Product Registration in a Day, Operations You Can Measure
New parts can be picked right away by importing a CAD model or training on a few sample shots, so even high-mix sites need no dedicated jigs. Pick counts, success rate, cycle time and bin-change history are recorded on the dashboard and in MES, so robot cell status can be checked at a glance.



